Dam Report

Bobby Payne Dam dam

Virginia, USA Hazard Undetermined
Today high
--
Tonight low
--
Dam height
25ft
Hazard rating
Undetermined
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Bobby Payne Dam -- None dam
Bobby Payne Dam None
About this dam

Bobby Payne Dam

Bobby Payne Dam, located in Fauquier, Virginia, is a privately owned structure regulated by the Department of Conservation and Recreation. Standing at a height of 24.75 feet, the dam boasts a storage capacity of 104.84 acre-feet and a surface area of 7.6 acres. While the dam's condition is currently rated as "Not Rated" and its hazard potential is labeled as "Undetermined," it is regularly inspected by the state and is equipped with emergency action plans to ensure the safety of surrounding communities in case of any unforeseen events.

Despite the lack of specific information on its primary purpose or dam type, Bobby Payne Dam's strategic location and design contribute to the overall water resource management in the area. With a maximum storage capacity of 104.84 acre-feet and a normal storage level of 63.84 acre-feet, the dam plays a crucial role in regulating water flow and providing flood control measures. Additionally, the dam's association with the state regulatory agency ensures that it adheres to necessary safety protocols and standards, further enhancing its importance in the region's water infrastructure.

While Bobby Payne Dam's risk assessment and management measures remain unspecified, its presence as a regulated structure with regular inspections and emergency preparedness plans underscores its significance in maintaining water resource stability and protecting downstream communities. As a part of the Norfolk District, the dam stands as a testament to responsible water management practices and serves as a vital component in the overall climate resilience efforts in Virginia.

StateNone
NID IDVA061061
Owner typePrivate
Dam height25 ft
Dam length320 ft
Max storage105 AF
Normal storage64 AF
Surface area7.6 ac
Hazard potentialUndetermined
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Bobby Payne Dam -- inflows here typically show up in storage 24-72 hours later.

Track Bobby Payne Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Bobby Payne Dam

Where does the data for Bobby Payne Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Undetermined hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Bobby Payne Dam.