Dam Report

Old Keyser Reservoir dam

West Virginia, USA Limestone Run Hazard High
Today high
--
Tonight low
--
Dam height
25ft
Hazard rating
High
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Old Keyser Reservoir -- None dam
Old Keyser Reservoir None · Limestone Run
About this dam

Old Keyser Reservoir

Old Keyser Reservoir, also known as Old Limestone Dam, is a concrete dam located in Mineral County, West Virginia. Built in 1911, this local government-owned structure serves as a water supply source in the area, specifically for the city of WATER SUPPLY. Situated on LIMESTONE RUN, the reservoir has a height of 25 feet and can hold up to 62 acre-feet of water, with a normal storage capacity of 44 acre-feet.

With a hazard potential rated as high and a fair condition assessment as of 2014, Old Keyser Reservoir plays a crucial role in the region's water resource management. The dam has a length of 332 feet and a maximum storage capacity of 62 acre-feet, covering a surface area of 5 acres. Despite not being regulated by the state, the reservoir undergoes inspections every 2 years to ensure its structural integrity and safety for the surrounding community.

Old Keyser Reservoir stands as a historic water infrastructure that continues to provide vital water resources to the residents of Mineral County. With a solid concrete construction and a long-standing presence in the area, this reservoir represents a key component in the local water supply system. As climate change impacts water resources, the maintenance and management of structures like Old Keyser Reservoir become increasingly important to ensure sustainable access to clean water for the community.

StateNone
River / streamLimestone Run
NID IDWV05722
Owner typeLocal Government
Primary purposeOther
Dam typeConcrete
Year built1911
Dam height25 ft
Dam length332 ft
Max storage62 AF
Normal storage44 AF
Surface area5.0 ac
Hazard potentialHigh
ConditionFair
Last inspectionMon, 20 Aug 2012 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Old Keyser Reservoir -- inflows here typically show up in storage 24-72 hours later.

Track Old Keyser Reservoir in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Old Keyser Reservoir

Where does the data for Old Keyser Reservoir come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the High hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.