Baldwin Millpond Dam Reservoir Report

Last Updated: December 5, 2025

Baldwin Millpond Dam, located in Bynum, North Carolina, was completed in 1820 and serves primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

This masonry dam stands at a hydraulic height of 8 feet and a structural height of 12 feet, with a length of 141 feet. It impounds Terrell Creek and has a storage capacity of 72 acre-feet, providing essential water resources for the surrounding area. Despite its age, the dam has a low hazard potential and has not been rated for condition assessment.

The dam, owned privately, is not regulated by the state but is subject to periodic inspections, with the last one conducted in June 1976. It does not have an Emergency Action Plan in place, and there is limited information available regarding risk assessment and management measures. Baldwin Millpond Dam, part of the Wilmington District, offers a picturesque recreational spot for visitors to enjoy fishing, boating, and other water activities in a serene natural setting.

As water resource and climate enthusiasts explore the historical significance and structural design of Baldwin Millpond Dam, they can appreciate its contribution to the local ecosystem and recreational opportunities. With its modest storage capacity and low hazard potential, this masonry dam remains a charming landmark within Chatham County, showcasing the harmonious balance between water management and leisure activities in the region.

Year Completed

1820

Dam Length

141

River Or Stream

Terrell Creek

Primary Dam Type

Masonry

Hydraulic Height

8

Drainage Area

13056

Nid Storage

72

Structural Height

12

Hazard Potential

Low

Nid Height

12
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.