Lineberry Lake Dam Reservoir Report

Last Updated: December 5, 2025

Lineberry Lake Dam, located in Ramseur, North Carolina, is a private earth dam built in 1962 primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam stands at a structural height of 22 feet with a hydraulic height of 21 feet, creating a reservoir with a normal storage capacity of 42 acre-feet and a maximum storage of 50 acre-feet. The dam spans 355 feet in length and is situated on the Sandy Creek-Tr river.

Despite being privately owned, Lineberry Lake Dam is subject to state inspection with a satisfactory condition assessment as of November 2013. The hazard potential is classified as low, indicating a low risk of failure. The dam does not fall under federal jurisdiction, and there are no associated structures or emergency action plans prepared.

Water resource and climate enthusiasts will appreciate the recreational opportunities provided by Lineberry Lake Dam while also recognizing the importance of regular inspections and maintenance to ensure its continued safety and functionality. The dam serves as a valuable asset for the local community, offering a serene recreational space for residents and visitors to enjoy amidst the natural beauty of Randolph County, North Carolina.

Year Completed

1962

Dam Length

355

River Or Stream

Sandy Creek-Tr

Primary Dam Type

Earth

Surface Area

4

Hydraulic Height

21

Nid Storage

50

Structural Height

22

Hazard Potential

Low

Nid Height

22
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.