Farmer Lake Dam Reservoir Report
Nearby: Pace Lake Dam Graysons Dam
Last Updated: December 5, 2025
Farmer Lake Dam, located in Stanly County, North Carolina, serves multiple purposes including fire protection, stock, and as a small fish pond.
°F
°F
mph
Wind
%
Humidity
Summary
The dam, primarily owned by a private entity, is not regulated by the state and has a low hazard potential. With a hydraulic height of 20 feet and a structural height of 25 feet, the dam has a storage capacity of 40 acre-feet and covers a surface area of 4 acres.
The dam, situated on Island Creek-Os near Cheraw Sc, was last inspected in October 2017 and was rated as being in "Not Rated" condition. Despite not being state-regulated, the dam undergoes regular inspections and meets state inspection requirements. The surrounding area is at low risk for potential hazards, and there are no emergency action plans or inundation maps prepared for the dam.
Overall, Farmer Lake Dam plays a crucial role in providing essential services such as fire protection and stock retention in the region. Although privately owned, the dam's structural integrity and maintenance are regularly monitored to ensure the safety of the surrounding community and wildlife. With its modest size and low hazard potential, Farmer Lake Dam stands as a valuable resource for water management in the area.
River Or Stream |
Island Creek-Os |
Primary Dam Type |
Earth |
Surface Area |
4 |
Hydraulic Height |
20 |
Nid Storage |
40 |
Structural Height |
25 |
Hazard Potential |
Low |
Nid Height |
25 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Brigham Lake Dam