Charlotte Pipe Bmp #2 Reservoir Report

Last Updated: December 5, 2025

Charlotte Pipe Bmp #2 is a water resource infrastructure located in Oakbrook, North Carolina, within Stanly County.


°F

°F

mph

Wind

%

Humidity

Summary

This BMP is regulated by the North Carolina Department of Environmental Quality (NCDEQ) and is subject to state permitting, inspection, and enforcement. The primary purpose of Charlotte Pipe Bmp #2 is categorized as "Other," with a high hazard potential and a condition assessment that is currently not rated.

While specific details such as dam height, volume, and completion date are not provided, it is known that Charlotte Pipe Bmp #2 is associated with the UT to Coldwater Creek waterway. The BMP has a history of regular inspections with a frequency of every 2 years, highlighting its importance in maintaining water quality and mitigating potential hazards. Despite not having an Emergency Action Plan (EAP) or inundation maps prepared, Charlotte Pipe Bmp #2 remains a critical structure in the local water management system.

As a key contributor to water resource management in the area, Charlotte Pipe Bmp #2 plays a vital role in safeguarding the environment and communities downstream. Its designation as a state-regulated structure underscores the importance of ensuring its integrity and functionality for the overall well-being of the region. Additionally, its high hazard potential emphasizes the need for continued monitoring and risk management measures to prevent any potential disasters and protect the surrounding ecosystem.

River Or Stream

UT to Coldwater Creek

Hazard Potential

High
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.