Mullis Dam Reservoir Report
Nearby: Umbarger Dam Hix James Dam
Last Updated: December 5, 2025
Mullis Dam, located in Iredell, North Carolina, is a private earth dam with a primary purpose of recreation.
°F
°F
mph
Wind
%
Humidity
Summary
With a hydraulic height of 22 feet and a structural height of 25 feet, this dam offers a maximum storage capacity of 20 acre-feet and covers a surface area of 2 acres. The dam, situated on the Camel Branch-Tr river or stream, serves as a low hazard potential structure with a condition assessment that is currently not rated.
Although Mullis Dam has not been inspected since October 2016, it is deemed to be in a stable condition. Despite its lack of state regulation and permitting, the dam's emergency action plan status and risk assessment measures remain unclear. With its picturesque surroundings and potential for outdoor activities, Mullis Dam stands as a captivating destination for water resource and climate enthusiasts seeking a serene recreational experience in the heart of North Carolina.
River Or Stream |
Camel Branch-Tr |
Primary Dam Type |
Earth |
Surface Area |
2 |
Hydraulic Height |
22 |
Drainage Area |
39 |
Nid Storage |
20 |
Structural Height |
25 |
Hazard Potential |
Low |
Nid Height |
25 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Hunting Creek Near Harmony
|
93cfs |
South Yadkin River Near Mocksville
|
230cfs |
Yadkin River At Elkin
|
706cfs |
Yadkin River At Wilkesboro
|
423cfs |
Mitchell River Near State Road
|
57cfs |
Reddies River At North Wilkesboro
|
67cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Mullis Dam