Canoe Creek Reservoir Report
Nearby: Scotch Valley Kettle
Last Updated: December 13, 2025
Canoe Creek is a state-regulated dam located in Blair, Pennsylvania, with a primary purpose of recreation.
°F
°F
mph
Wind
%
Humidity
Summary
Built in 1971, this earth-type dam stands at a height of 35 feet and has a length of 800 feet. It has a storage capacity of 4350 acre-feet, with a normal storage level of 1485 acre-feet, covering a surface area of 155 acres. The dam is situated on the Canoe Creek river, in Frankstown Township, and is managed by the Pennsylvania Department of Environmental Protection.
Despite being classified as having a high hazard potential, Canoe Creek is currently in fair condition, as assessed during its last inspection in June 2020. The dam is subject to regular state permitting, inspection, and enforcement to ensure its safety and compliance with regulations. While the dam does not have a designated Emergency Action Plan (EAP) prepared, it is monitored closely to address any potential risks and ensure the safety of the surrounding community. Canoe Creek serves as a vital recreational resource in the area, offering opportunities for outdoor activities and enjoying the natural beauty of the region.
Year Completed |
1971 |
Dam Length |
800 |
Dam Height |
35 |
River Or Stream |
CANOE CREEK |
Primary Dam Type |
Earth |
Surface Area |
155 |
Drainage Area |
16.4 |
Nid Storage |
4350 |
Hazard Potential |
High |
Foundations |
Unlisted/Unknown |
Nid Height |
35 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Canoe Creek