Jeff Sheehan Sod Farm Dam Reservoir Report

Last Updated: December 5, 2025

Jeff Sheehan Sod Farm Dam, located in Union, South Carolina, is a privately owned structure primarily used for irrigation purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, classified as an Earth dam with a height of 32 feet and a length of 785 feet, has a storage capacity of 135 acre-feet and covers a surface area of 12 acres. Situated on Elishas Creek, the dam is regulated and inspected by the South Carolina Department of Health and Environmental Control.

With a low hazard potential and fair condition assessment as of June 2017, Jeff Sheehan Sod Farm Dam is considered to be in satisfactory operational condition. While the dam has not undergone any recent modifications or risk assessments, it meets regulatory guidelines for safety and emergency preparedness. With no associated locks or spillways, the dam serves as a vital resource for the local agricultural community, ensuring reliable water supply for irrigation needs.

Managed under private ownership, Jeff Sheehan Sod Farm Dam plays a crucial role in supporting agricultural activities in the region. As a key component of the water resource infrastructure in Union, South Carolina, the dam provides essential water storage capacity for irrigation purposes, contributing to the sustainability of local farming operations. Its consistent operation and regulatory compliance underscore its importance in maintaining water security and climate resilience in the area.

Dam Length

785

Dam Height

32

River Or Stream

ELISHAS CREEK

Primary Dam Type

Earth

Surface Area

12

Nid Storage

135

Hazard Potential

Low

Foundations

Soil

Nid Height

32
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.