Eugene Welder Reservoir Report
Nearby: Howard Capp Roy Mcginnis
Last Updated: December 6, 2025
Eugene Welder is a privately owned dam located in Perkins County, South Dakota, built in 1959 on the TR Moreau River.
°F
°F
mph
Wind
%
Humidity
Summary
Managed by the South Dakota Department of Environment and Natural Resources, this earth dam stands at a height of 26 feet and has a storage capacity of 83 acre-feet. With a low hazard potential and a condition assessment of "Not Rated," Eugene Welder has not been inspected recently but is regulated, permitted, and inspected by state authorities.
Although the dam has not been modified in recent years, it is equipped with outlet gates and a maximum discharge capacity of 150 cubic feet per second. Despite lacking an emergency action plan or inundation maps, the dam is considered to meet guidelines and poses a low risk to surrounding areas. Managed by the Natural Resources Conservation Service, Eugene Welder remains an essential structure for water resource management in the region, providing flood control and water storage benefits for the local community.
Year Completed |
1959 |
Dam Length |
340 |
Dam Height |
26 |
River Or Stream |
TR MOREAU RIVER |
Primary Dam Type |
Earth |
Hydraulic Height |
26 |
Nid Storage |
83 |
Hazard Potential |
Low |
Nid Height |
26 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Eugene Welder