Faber Reservoir Report
Nearby: Bucksnort Ranch Indian Creek
Last Updated: December 13, 2025
Faber is a privately owned recreational dam located on Wallace Branch in Humphreys, Tennessee.
°F
°F
mph
Wind
%
Humidity
Summary
Constructed in 2003, this Earth-type dam stands at a structural height of 31.3 feet with a hydraulic height of 27.9 feet. With a storage capacity of 180 acre-feet, Faber covers a surface area of 12.5 acres and serves a drainage area of 0.25 square miles.
Despite being categorized as having a high hazard potential, Faber's condition assessment remains unrated as of the last inspection in January 2018. The dam features an uncontrolled spillway and lacks outlet gates. While the risk assessment is moderate, there are no emergency action plans in place, and the dam does not meet US Army Corps of Engineers standards.
Climate and water resource enthusiasts may find Faber a noteworthy structure due to its recreational purpose, location, and features. As it continues to serve the community, ensuring its safety and compliance with regulatory standards will be crucial for mitigating potential risks and safeguarding the surrounding environment.
Year Completed |
2003 |
Dam Length |
525 |
River Or Stream |
WALLACE BRANCH |
Primary Dam Type |
Earth |
Surface Area |
12.5 |
Hydraulic Height |
27.9 |
Drainage Area |
0.25 |
Nid Storage |
180 |
Structural Height |
31.3 |
Outlet Gates |
None |
Hazard Potential |
High |
Nid Height |
31 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Duck River Above Hurricane Mills
|
1730cfs |
Piney River At Vernon
|
92cfs |
Buffalo River Below Lobelville
|
500cfs |
Duck River At Hwy 100 At Centerville
|
1320cfs |
Cypress Creek At Camden
|
2cfs |
Yellow Creek At Ellis Mills
|
38cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Faber