Mcminnville Water Supply Reservoir Report

Last Updated: December 14, 2025

Mcminnville Water Supply, located in Marshall, Tennessee, is a crucial water resource managed by the local government for the primary purpose of water supply.


°F

°F

mph

Wind

%

Humidity

Summary

This concrete dam on the Barren Fork River stands at 17.7 feet high and was completed in 1900, providing a storage capacity of 623 acre-feet. The dam's significant hazard potential is mitigated by regular inspections, with the most recent assessment in August 2019 deeming its condition satisfactory.

Managed by the Tennessee Safe Dams Program, the Mcminnville Water Supply dam is regulated, permitted, and inspected by state authorities to ensure its structural integrity and operational safety. Despite being uncontrolled, the spillway of the dam helps manage water flow during periods of excess discharge. With a moderate risk assessment rating, the dam is monitored for any potential hazards, and risk management measures are in place to address any issues that may arise in the future. For water resource and climate enthusiasts, the Mcminnville Water Supply serves as a vital infrastructure supporting the community's water needs while adhering to strict regulatory standards for safety and efficiency.

Year Completed

1900

Dam Length

291

River Or Stream

BARREN FORK

Primary Dam Type

Concrete

Surface Area

89

Hydraulic Height

17.7

Drainage Area

297

Nid Storage

623

Structural Height

17.7

Outlet Gates

None

Hazard Potential

Significant

Nid Height

18
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.