Bowers Lake Dam Reservoir Report

Last Updated: December 5, 2025

Bowers Lake Dam, located in Caldwell, Texas, was completed in 1962 and serves multiple purposes including fire protection, stock, and recreation.


°F

°F

mph

Wind

%

Humidity

Summary

This private earth dam, with a height of 14 feet and a length of 1320 feet, is situated on the TR-DAVIDSON CREEK river. The dam has a storage capacity of 120 acre-feet, with a normal storage level of 60 acre-feet, covering a surface area of 15 acres.

Despite not having a spillway, Bowers Lake Dam is equipped with one outlet gate for water release. The dam's hazard potential is rated as "Not Available" with a high risk assessment level of 2. The dam's condition assessment is "Not Rated," and it is not regulated by the state. With no recent inspection data available, Bowers Lake Dam remains a significant feature in the area, contributing to water resource management and serving as a small fish pond for local residents.

Year Completed

1962

Dam Length

1320

Dam Height

14

River Or Stream

TR-DAVIDSON CREEK

Primary Dam Type

Earth

Surface Area

15

Hydraulic Height

14

Nid Storage

120

Structural Height

14

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

14
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.