Denton Creek Ws Scs Site 9a Dam Reservoir Report

Last Updated: December 5, 2025

Denton Creek WS SCS Site 9a Dam, located in Montague, Texas, was completed in 1969 by the USDA NRCS with a primary purpose of flood risk reduction.


°F

°F

mph

Wind

%

Humidity

Summary

This earth dam stands at a height of 37 feet and a length of 1515 feet, with a storage capacity of 682 acre-feet and a drainage area of 1.67 square miles. Despite its lack of a spillway, the dam serves as a vital structure for debris control, fire protection, and small fish pond purposes along Braden Branch.

Managed by the local government and regulated by the Texas Commission on Environmental Quality (TCEQ), Denton Creek WS SCS Site 9a Dam has not been rated for its condition assessment but is considered to have a high risk potential. With no recent inspection date available, the dam's emergency action plan status and risk management measures remain unknown. As an essential component of the flood control infrastructure in the area, this dam plays a crucial role in managing water resources and climate-related risks in the region.

Year Completed

1969

Dam Length

1515

Dam Height

37

River Or Stream

BRADEN BRANCH

Primary Dam Type

Earth

Surface Area

11

Hydraulic Height

37

Drainage Area

1.67

Nid Storage

682

Structural Height

37

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

37
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.