Denton Creek Ws Scs Site 3c Dam Reservoir Report

Last Updated: December 5, 2025

The Denton Creek WS SCS Site 3c Dam, located in Montague, Texas, is a crucial piece of infrastructure designed by the USDA NRCS to mitigate flood risks along the TR-DRY VALLEY CREEK.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1968, this earth dam stands at a height of 36 feet and spans a length of 1050 feet, with a storage capacity of 372 acre-feet. The primary purpose of this dam is flood risk reduction, with additional benefits such as debris control, fire protection, and stock or small fish pond management.

Managed by the local government and regulated by the Texas Commission on Environmental Quality (TCEQ), the Denton Creek WS SCS Site 3c Dam plays a vital role in safeguarding the surrounding area from potential hazards. Despite its high risk assessment rating, the dam's condition remains unrated, highlighting the need for regular inspections and maintenance to ensure its continued effectiveness in protecting the community. As water resource and climate enthusiasts, understanding the significance of structures like the Denton Creek Dam is essential in promoting sustainable water management practices and resilience in the face of changing environmental conditions.

Year Completed

1968

Dam Length

1050

Dam Height

36

River Or Stream

TR-DRY VALLEY CREEK

Primary Dam Type

Earth

Surface Area

6

Hydraulic Height

36

Drainage Area

0.99

Nid Storage

372

Structural Height

36

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

36
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.