Richards Park Dam Reservoir Report

Last Updated: December 5, 2025

Richards Park Dam, located in Brady, Texas, on Brady Creek, was completed in 1912 and is owned by the local government.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, designed by John B Hawley, is primarily used for recreation purposes and stands at a height of 11 feet with a length of 300 feet. It has a storage capacity of 50 acre-feet and a normal storage of 35 acre-feet. The dam is regulated and inspected by the Texas Commission on Environmental Quality (TCEQ) to ensure its safety and compliance with state regulations.

Although the hazard potential and condition assessment of the dam are not available, it has been classified as having a high risk level (2). Despite the lack of recent inspection data, the dam remains operational and has not been rated for its current condition. The absence of a spillway and the limited information on associated structures suggest that the dam may pose certain risks, which require careful monitoring and management by local authorities. For water resource and climate enthusiasts, Richards Park Dam serves as a significant structure in the region, highlighting the importance of maintaining and monitoring dams for both recreational and safety purposes.

Year Completed

1912

Dam Length

300

Dam Height

11

River Or Stream

BRADY CREEK

Primary Dam Type

Gravity

Hydraulic Height

11

Nid Storage

50

Structural Height

11

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

11
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.