City Of Killeen Lake Dam Reservoir Report

Last Updated: December 25, 2025

City of Killeen Lake Dam, located in Bell County, Texas, was completed in 1968 and is owned privately.


°F

°F

mph

Wind

%

Humidity

Summary

Designed by USDA NRCS, this Earth dam stands at a height of 19 feet and stretches 900 feet in length, with a storage capacity of 243 acre-feet. The primary purpose of this dam is for irrigation, although it also serves recreational purposes.

Situated on TR-South Nolan Creek, the dam has a spillway width of 60 feet and can discharge up to 2155 cubic feet per second. With a surface area of 22 acres and a drainage area of 0.4 square miles, the dam provides essential water resources for the region. While its hazard potential and condition assessment are not currently available, the dam is inspected every 5 years and has a moderate risk rating.

For water resource and climate enthusiasts, City of Killeen Lake Dam offers a fascinating look at the intersection of infrastructure and natural resources. With its crucial role in irrigation and recreation, this Earth dam plays a significant part in managing water resources in the area. Its design, construction, and maintenance reflect the ongoing efforts to balance human needs with environmental considerations, making it a noteworthy site for those interested in water management and climate resilience.

Year Completed

1968

Dam Length

900

Dam Height

19

River Or Stream

TR-SOUTH NOLAN CREEK

Primary Dam Type

Earth

Surface Area

22

Hydraulic Height

19

Drainage Area

0.4

Nid Storage

243

Structural Height

19

Outlet Gates

Uncontrolled - 2

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

19
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.