Dam Report

Metcalfe Dam dam

Texas, USA South Concho River Hazard Not Available
Today high
--
Tonight low
--
Dam height
8ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Metcalfe Dam -- None dam
Metcalfe Dam None · South Concho River
About this dam

Metcalfe Dam

Metcalfe Dam, located in San Angelo, Texas, was completed in 1912 and serves as a vital water supply structure for the region. The dam, with a height of 8 feet and a length of 250 feet, is designed as a buttress-type structure along the South Concho River. With a storage capacity of 250 acre-feet and a surface area of 62.5 acres, the dam plays a crucial role in sustaining the water needs of the community.

Managed by the local government and regulated by the Texas Commission on Environmental Quality (TCEQ), Metcalfe Dam is inspected, permitted, and enforced to ensure its structural integrity and compliance with safety standards. Although the dam does not have a spillway or locks, it is equipped with a single outlet gate for water management. Despite being rated as "High Risk (2)", the dam's hazard potential and condition assessment are currently not available, indicating the need for further evaluation and risk management measures.

As an essential component of the water infrastructure in Schleicher County, Texas, Metcalfe Dam underscores the importance of sustainable water resource management and climate resilience. With its historical significance and critical role in water supply, the dam represents a key asset in supporting the community's water needs while highlighting the ongoing challenges and opportunities in ensuring the safety and efficiency of water infrastructure in the face of changing climate conditions.

StateNone
River / streamSouth Concho River
NID IDTX03138
Owner typeLocal Government
Primary purposeWater Supply
Dam typeButtress
Year built1912
Dam height8 ft
Dam length250 ft
Max storage250 AF
Normal storage250 AF
Surface area62.5 ac
Hazard potentialNot Available
ConditionNot Rated
Last inspectionThu, 26 Jul 1979 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Metcalfe Dam -- inflows here typically show up in storage 24-72 hours later.

Track Metcalfe Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Metcalfe Dam

Where does the data for Metcalfe Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Metcalfe Dam.