Zaleski Lake Dam Reservoir Report

Last Updated: February 12, 2026

Zaleski Lake Dam, located in Bell County, Texas, was completed in 1978 for the primary purpose of recreation.


Summary

This privately-owned dam stands at 7 feet high, with a length of 640 feet and a storage capacity of 56 acre-feet. Situated on TR-Pond Creek, the dam is classified as an earth dam with a buttress core type. Despite its modest size, Zaleski Lake Dam presents a high risk due to its hazard potential and lack of condition assessment.

Although Zaleski Lake Dam does not have a spillway, outlet gates are in place to manage water levels. While the dam has not been rated for its current condition, it is regularly inspected by the state agency and enforcement measures are in place. With a history of modifications and no inundation maps prepared, Zaleski Lake Dam presents a potential risk to its surrounding area. As a popular spot for recreation, it is important for water resource and climate enthusiasts to stay informed about the management and safety of Zaleski Lake Dam.



°F

°F

mph

Wind

%

Humidity


15-Day Weather Outlook


Year Completed

1978

Dam Length

640

Dam Height

7

River Or Stream

TR-POND CREEK

Primary Dam Type

Earth

Surface Area

10

Hydraulic Height

7

Nid Storage

56

Structural Height

7

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

7
       
Seasonal Comparison

5-Day Hourly Forecast Detail

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.