C Smith Dam Reservoir Report

Last Updated: December 5, 2025

C Smith Dam, located in Montague, Texas, was completed in 1981 by the USDA NRCS and serves multiple purposes such as fire protection, stock, and small fish pond management.


°F

°F

mph

Wind

%

Humidity

Summary

This privately owned earth dam stands at a height of 26 feet and has a storage capacity of 37 acre-feet, with a drainage area of 150 square miles. Despite its lack of a spillway, the dam is designed to handle high-risk situations, with a hazard potential rated as "Not Available" and a risk assessment of "High (2)".

Although not regulated by the state, C Smith Dam undergoes regular inspections and is permitted for operation. With its strategic location on TR-Bingham Creek and close proximity to the Tulsa District, the dam plays a crucial role in managing water resources for the local community. While the dam's condition assessment is currently "Not Rated," its risk management measures are actively monitored to ensure safety and efficiency in water resource management. For water resource and climate enthusiasts, C Smith Dam offers a fascinating glimpse into sustainable water management practices and the importance of infrastructure in mitigating natural hazards.

Year Completed

1981

Dam Length

298

Dam Height

26

River Or Stream

TR-BINGHAM CREEK

Primary Dam Type

Earth

Drainage Area

150

Nid Storage

37

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

26
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.