Bal Lake Dam Reservoir Report

Last Updated: December 5, 2025

Bal Lake Dam, located in Tarrant County, Texas, serves as a crucial water resource structure on the Trinity River.


°F

°F

mph

Wind

%

Humidity

Summary

This private-owned Earth dam, with a height of 22.14 feet and a length of 647 feet, provides a storage capacity of 31 acre-feet and a surface area of 3.44 acres. Despite its important role in water management, the dam's condition assessment is rated as poor, indicating a need for maintenance and repairs.

The dam features an uncontrolled spillway with two outlet gates, and its hazard potential is not available. The dam is regulated by the Texas Commission on Environmental Quality (TCEQ), and inspections are conducted regularly to ensure its safety and stability. With a moderate risk rating of 3, there is a need for risk management measures to be implemented to prevent any potential hazards or emergencies that could arise from the dam's deteriorating condition. As water resource and climate enthusiasts, it is essential to stay informed about the status of Bal Lake Dam and advocate for its proper maintenance and upkeep to safeguard the surrounding community and environment.

Dam Length

647

Dam Height

22.14

River Or Stream

UN TR-TRINITY RIVER

Primary Dam Type

Earth

Surface Area

3.44

Hydraulic Height

22.14

Drainage Area

0.21

Nid Storage

31

Structural Height

22.14

Outlet Gates

Uncontrolled - 2

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

22
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.