Mt Regional Water Special Service Dist Reservoir Report

Last Updated: December 19, 2025

Mt Regional Water Special Service District in Summit, Utah, is a privately owned water supply facility regulated by the Utah Division of Water Rights.


°F

°F

mph

Wind

%

Humidity

Summary

With a primary purpose of water supply, this dam is classified as an Earth type structure with a hydraulic height of 2.5 feet and a structural height of 5 feet. The dam, located at 13,1S~4E SL coordinates, has a length of 1062 feet and a storage capacity of 15 acre-feet.

Although the dam's condition assessment is not rated and the last inspection date is unknown, it is categorized as having a significant hazard potential. Despite not having an Emergency Action Plan (EAP) prepared or meeting guidelines, the facility is inspected every 2 years to ensure compliance with state regulations. The dam's maximum discharge capacity is 42 cubic feet per second, with a spillway width of 8 feet. Overall, Mt Regional Water Special Service District plays a critical role in providing water resources to the surrounding community while maintaining compliance with regulatory agencies.

Dam Length

1062

Primary Dam Type

Earth

Hydraulic Height

2.5

Nid Storage

15

Structural Height

5

Hazard Potential

Significant

Nid Height

5
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.