Amelia County Dam # 16 Reservoir Report

Last Updated: December 5, 2025

Located in Amelia County, Virginia, Amelia County Dam # 16 is a state-regulated dam with a height of 23.25 feet and a storage capacity of 178 acre-feet.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, which is under the jurisdiction of the Department of Conservation and Recreation, has not been rated for condition assessment and has an undetermined hazard potential. Despite its lack of detailed information, the dam is inspected regularly and meets state permitting and enforcement requirements.

With a structural height matching its hydraulic height, Amelia County Dam # 16 spans 370 feet and covers a surface area of 10.4 acres. The dam, situated in the Norfolk District, does not have a designated primary purpose or specified dam type. Although there is no available data on its completion year or spillway type, the dam's normal storage capacity is noted at 73.84 acre-feet, indicating its importance in water resource management in the region.

While specific details regarding its construction, design, and operation are not provided, Amelia County Dam # 16 remains a significant structure in water resource management in Amelia County. With a focus on state regulation and compliance, this dam plays a crucial role in maintaining water storage and flood control in the area. Enthusiasts of water resources and climate in Virginia will find interest in monitoring the ongoing assessments and management measures for this essential infrastructure.

Dam Length

370

Dam Height

23.25

Surface Area

10.4

Hydraulic Height

23.25

Nid Storage

178

Structural Height

23.25

Hazard Potential

Undetermined

Nid Height

23
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.