Tennessee Coal And Iron Reservoir Report

Last Updated: December 5, 2025

Tennessee Coal and Iron, also known as TCI, is a private company located in Baldwin, Alabama, near Roans Creek.


°F

°F

mph

Wind

%

Humidity

Summary

The dam associated with TCI was completed in 1953 for recreational purposes, providing a maximum storage capacity of 2000 acre-feet and a normal storage of 1200 acre-feet. With a hydraulic height of 16 feet and a structural height of 24 feet, this earth dam spans 1125 feet in length.

Despite being labeled as having a low hazard potential and not yet rated for its condition assessment, the dam at Tennessee Coal and Iron serves as a vital resource for water recreation in the area. With a maximum discharge capacity of 13000 cubic feet per second, this dam plays a crucial role in managing water flow and storage in the region. Although not currently regulated or inspected by state agencies, the dam continues to provide valuable benefits to the community.

The location of Tennessee Coal and Iron, nestled in the picturesque surroundings of Taylors Camp, underscores the importance of this dam for both water resource management and recreational activities. As water resource and climate enthusiasts, understanding the significance of this structure in providing water storage and flow regulation is essential for appreciating the valuable role it plays in the local ecosystem.

Year Completed

1953

Dam Length

1125

River Or Stream

ROANS CREEK

Primary Dam Type

Earth

Hydraulic Height

16

Nid Storage

2000

Structural Height

24

Hazard Potential

Low

Nid Height

24
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.