Dam Report

Pope dam

Alabama, USA Tr Big Canoe Creek Hazard Significant
Today high
--
Tonight low
--
Dam height
20ft
Hazard rating
Significant
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Pope -- None dam
Pope None · Tr Big Canoe Creek
About this dam

Pope

Pope is a privately owned recreational dam located in St. Clair, Alabama, along the TR Big Canoe Creek. Built in 1948, this Earth-type dam stands at a height of 20 feet and has a hydraulic height of 15 feet. It has a storage capacity of 56 acre-feet and a maximum discharge of 350 cubic feet per second. The dam serves primarily for recreational purposes and does not fall under state regulation or jurisdiction.

Despite being privately owned, Pope has a significant hazard potential and is currently rated as "Not Rated" in terms of condition assessment. The dam has not been inspected recently, and there is no existing emergency action plan in place. With its location in a picturesque area, it is important for stakeholders to ensure the safety and maintenance of Pope to prevent any potential risks or hazards in the future. It is essential for the owners to consider implementing risk management measures and updating emergency protocols to ensure the safety of the surrounding community.

In conclusion, Pope dam in Alabama serves as a recreational site along TR Big Canoe Creek, providing opportunities for leisure activities in the area. While it offers a pleasant environment for visitors, it is crucial to prioritize safety measures and maintenance to mitigate any potential risks associated with its significant hazard potential. As water resource and climate enthusiasts, it is important to stay informed about the condition and management of dams like Pope to contribute to the preservation of these natural resources for future generations.

StateNone
River / streamTr Big Canoe Creek
NID IDAL01500
Owner typePrivate
Primary purposeRecreation
Dam typeEarth
Year built1948
Dam length250 ft
Max storage56 AF
Normal storage42 AF
Hazard potentialSignificant
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Pope -- inflows here typically show up in storage 24-72 hours later.

Track Pope in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Pope

Where does the data for Pope come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Significant hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Pope.