Williams Lake Dam Reservoir Report

Last Updated: December 5, 2025

Williams Lake Dam, located in Vilonia, Arkansas, is a privately owned structure that serves multiple purposes, including irrigation, fire protection, stock, small fish pond, and recreation.


°F

°F

mph

Wind

%

Humidity

Summary

Completed in 1957, this earth dam stands at a height of 29 feet and has a length of 234 feet. It has a storage capacity of 233 acre-feet and covers a surface area of 5 acres.

The dam is situated on the Little Cypress Creek tributary and is regulated by the Arkansas Natural Resources Commission. It has a low hazard potential and is currently rated as "Not Rated" in terms of condition assessment. The last inspection of the dam was conducted in March 2005, and it meets state permitting, inspection, and enforcement requirements. Despite its age, Williams Lake Dam continues to provide essential services for the surrounding area.

Water resource and climate enthusiasts interested in the infrastructure and management of dams will find Williams Lake Dam a fascinating subject. Its multi-purpose functionality, regulatory oversight, and historical significance as an irrigation source make it a noteworthy structure within the Arkansas water management landscape. With its low hazard potential and ongoing compliance with state regulations, Williams Lake Dam stands as a testament to effective dam management practices in the region.

Year Completed

1957

Dam Length

234

Dam Height

29

River Or Stream

LITTLE CYPRESS CREEK TRIBUTARY

Primary Dam Type

Earth

Surface Area

5

Hydraulic Height

26

Drainage Area

0.44

Nid Storage

233

Structural Height

29

Hazard Potential

Low

Nid Height

29
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.