Morris Dam Reservoir Report

Last Updated: December 5, 2025

Morris Dam, located in Alford, Florida, was completed in 1962 and serves primarily for irrigation purposes.


°F

°F

mph

Wind

%

Humidity

Summary

This privately owned earth dam stands at 10 feet tall and stretches 300 feet in length, with a storage capacity of 200 acre-feet. Situated on the TR Kent Mill Lake, the dam has a low hazard potential and is currently in a not rated condition.

Although the dam has not been inspected since 1994, it is regulated by the state and undergoes regular inspections, permitting, and enforcement. With a maximum discharge of 90 cubic feet per second, Morris Dam provides fire protection, small fish pond, and stock purposes in addition to irrigation. Despite its modest size, the dam plays a crucial role in water resource management in the region and contributes to the local agricultural and environmental landscape.

Year Completed

1962

Dam Length

300

Dam Height

10

River Or Stream

TR KENT MILL LAKE

Primary Dam Type

Earth

Surface Area

20

Hydraulic Height

10

Nid Storage

200

Structural Height

7

Hazard Potential

Low

Nid Height

10
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.