Bradshaw Lake Dam Reservoir Report

Last Updated: December 5, 2025

Bradshaw Lake Dam, located in Canton, Georgia, is a private-owned structure on Avery Creek that serves primarily for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The earth dam stands at a height of 29 feet and stretches 537 feet in length, with a storage capacity of 734.6 acre-feet. Despite its low hazard potential, the dam has not been rated for its condition, and the last inspection was conducted in 2001.

This dam, with its uncontrolled spillway and outlet gates, poses a moderate risk according to assessments. It is not regulated by the state but is subject to inspections every five years. Although the dam's condition remains unknown, its location in Cherokee County adds to the allure of its surroundings, making it a popular spot for outdoor enthusiasts interested in water resources and climate.

With its scenic setting and potential for recreational activities, Bradshaw Lake Dam offers an intriguing blend of natural beauty and human-made infrastructure. As climate change continues to impact water resources, understanding and monitoring structures like this dam become increasingly important for enthusiasts seeking to appreciate and protect these valuable assets.

Dam Length

537

Dam Height

29

River Or Stream

AVERY CREEK

Primary Dam Type

Earth

Surface Area

23

Drainage Area

1380

Nid Storage

734.6

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

29
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.