Kersey Lake Dam Reservoir Report

Last Updated: December 5, 2025

Kersey Lake Dam, also known as Loch Lohman Lake Dam, is a private dam located in Bibb, Georgia, with a height of 27 feet and a storage capacity of 62 acre-feet.


°F

°F

mph

Wind

%

Humidity

Summary

Managed by the Natural Resources Conservation Service, this buttress-style dam has an uncontrolled spillway and is inspected regularly for safety compliance. Although the dam has a low hazard potential, it is considered to have a moderate risk level, indicating the need for ongoing risk management measures.

The dam's primary purpose and construction year are unspecified, but its location in a region with a normal storage capacity of 31 acre-feet highlights its significance for water management in the area. While the dam itself does not have a designated purpose or specific design type, its presence in the Savannah District underlines its importance for local water resources and climate regulation. With a history of inspections dating back to June 2015, Kersey Lake Dam serves as a critical infrastructure for water storage and conservation efforts in Georgia.

Overall, Kersey Lake Dam plays a vital role in water resource management in Bibb County, Georgia. With its controlled storage capacity and regular inspections, the dam serves as a key component of the region's water infrastructure. As climate change continues to impact water availability and quality, the maintenance and upkeep of dams like Kersey Lake Dam are crucial for ensuring sustainable water resources for future generations.

Dam Height

27

Nid Storage

62

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

27
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.