Sieren Dam Reservoir Report

Last Updated: December 13, 2025

Sieren Dam, located in Keokuk, Iowa, was completed in 1977 and is primarily used for recreation purposes.


°F

°F

mph

Wind

%

Humidity

Summary

Managed by a private owner, the dam stands at 23 feet high with a length of 430 feet, creating a reservoir with a storage capacity of 93 acre-feet. The dam is situated on TR-GERMAN CREEK and is regulated by the Iowa Department of Natural Resources.

With a surface area of 4.8 acres and serving multiple purposes such as fire protection, stock pond, and recreation, Sieren Dam plays a crucial role in water resource management. Despite its low hazard potential, the dam's condition assessment remains unrated, with its last inspection dating back to 1990. The risk assessment for the dam is moderate, emphasizing the need for ongoing risk management measures to ensure its safety and long-term functionality.

Water resource and climate enthusiasts will be intrigued by Sieren Dam's unique characteristics, including its earth dam type, uncontrolled spillway, and soil foundation. As a key feature in the Rock Island District, the dam contributes to the local watershed's ecological balance and provides a valuable recreational space for the community. Its location in Coppock, Iowa, further highlights its significance in the region's water infrastructure and invites exploration and appreciation for its role in sustaining the environment amidst changing climate patterns.

Year Completed

1977

Dam Length

430

Dam Height

23

River Or Stream

TR-GERMAN CREEK

Primary Dam Type

Earth

Surface Area

4.8

Drainage Area

0.42

Nid Storage

93

Hazard Potential

Low

Foundations

Soil

Nid Height

23
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.