Ozark Fisheries Dam Reservoir Report

Last Updated: December 20, 2025

Ozark Fisheries Dam, located in Montreal, Missouri, was completed in 1956 for the primary purpose of flood risk reduction along TR-SELLARS CREEK.


°F

°F

mph

Wind

%

Humidity

Summary

This private earth dam stands at a height of 20 feet and has a storage capacity of 492 acre-feet, with a normal storage level of 300 acre-feet. The dam covers a surface area of 46 acres and serves a drainage area of 445 square miles.

Despite being privately owned, Ozark Fisheries Dam is not regulated or inspected by the state, as it falls under the jurisdiction of the St. Louis District of the US Army Corps of Engineers. With a low hazard potential and a condition assessment of "Not Rated," the dam's safety and maintenance are crucial for preventing potential risks. While it currently does not have an Emergency Action Plan in place, ensuring proper risk management measures and emergency preparedness is essential for the safety of the surrounding area in case of any unforeseen events.

Year Completed

1956

Dam Height

20

River Or Stream

TR-SELLARS CREEK

Primary Dam Type

Earth

Surface Area

46

Drainage Area

445

Nid Storage

492

Structural Height

20

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

20
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.