Water Mill Lake Dam Reservoir Report

Last Updated: December 5, 2025

Water Mill Lake Dam, located in St.


°F

°F

mph

Wind

%

Humidity

Summary

Elizabeth, Missouri, was completed in 2007 by the Miller Companies. This private dam, standing at 29 feet tall and stretching 950 feet in length, holds a storage capacity of 435 acre-feet and serves a drainage area of 851 acres. The dam, primarily made of earth with a stone core, sits on a foundation of rock and soil along the tributary to Brushy Fork.

Despite being privately owned and not regulated by the state, Water Mill Lake Dam is deemed to have a significant hazard potential, with a moderate risk assessment score of 3. The dam is classified as uncontrolled spillway type, with no outlet gates. While the condition of the dam is currently not rated, its emergency action plan status and risk management measures remain unspecified. With its captivating location and intriguing design, Water Mill Lake Dam is sure to capture the interest of water resource and climate enthusiasts alike.

Year Completed

2007

Dam Length

950

Dam Height

29

River Or Stream

TRIB TO BRUSHY FORK

Primary Dam Type

Earth

Surface Area

36

Drainage Area

851

Nid Storage

435

Outlet Gates

None

Hazard Potential

Significant

Foundations

Rock, Soil

Nid Height

29
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.