Hamms Detention Dam Reservoir Report
Last Updated: December 25, 2025
Located in Nashua, Montana, Hamms Detention Dam serves as a crucial structure for fire protection, stock, and as a small fish pond.
°F
°F
mph
Wind
%
Humidity
Summary
Managed by the Bureau of Land Management, this gravity dam stands at 19 feet tall with a hydraulic height of 13 feet. Completed in 1957, the dam has a storage capacity of 495 acre-feet and covers a surface area of 110 acres.
Despite its low hazard potential, the condition assessment for Hamms Detention Dam has been deemed unsatisfactory. With the last inspection conducted in July 2011, the dam's emergency action plan and risk management measures are currently not up to date. However, the risk assessment for the dam falls within the moderate category, indicating a level 3 risk. With its primary purpose of serving the local community for various needs, the presence of Hamms Detention Dam remains vital for the surrounding area's water resource management and climate resilience.
Year Completed |
1957 |
Dam Length |
2760 |
River Or Stream |
WILLOW CK./MILK RIVER |
Primary Dam Type |
Gravity |
Surface Area |
110 |
Hydraulic Height |
13 |
Drainage Area |
12.4 |
Nid Storage |
495 |
Structural Height |
19 |
Hazard Potential |
Low |
Foundations |
Unlisted/Unknown |
Nid Height |
19 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Hamms Detention Dam