Dam Report

Longview Sewage Lagoon No 1 dam

Washington, USA Tr-Coal Creek Slough-Offstream Hazard Low
Today high
--
Tonight low
--
Dam height
9ft
Hazard rating
Low
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Longview Sewage Lagoon No 1 -- None dam
Longview Sewage Lagoon No 1 None · Tr-Coal Creek Slough-Offstream
About this dam

Longview Sewage Lagoon No 1

Longview Sewage Lagoon No 1, located in Longview, Washington, is a vital water resource managed by the local government. The lagoon, completed in 1986, serves as a key component in the treatment and disposal of sewage in the area. With a storage capacity of 207 acre-feet and a surface area of 28 acres, it plays a crucial role in maintaining water quality in the region.

This Earth dam structure, with a hydraulic height of 9 feet and a structural height of 4 feet, helps regulate the flow of water from Tr-Coal Creek Slough-Offstream. Despite its low hazard potential and not being currently rated, the Longview Sewage Lagoon No 1 is subject to regular inspections, enforcement, and permitting by the Washington Department of Ecology. With a drainage area of 0.04 square miles and a maximum discharge of 8 cubic feet per second, this facility plays a significant role in protecting the environment and public health.

As an essential part of the local water infrastructure, Longview Sewage Lagoon No 1 demonstrates the commitment of the community to effective sewage management. With its state-regulated status, regular inspections, and low hazard potential, this lagoon serves as a model for responsible water resource management. Its location in Cowlitz County, Washington, showcases the importance of sustainable practices in maintaining the quality of the region's waterways.

StateNone
River / streamTr-Coal Creek Slough-Offstream
NID IDWA00507
Owner typeLocal Government
Primary purposeOther
Dam typeEarth
Year built1986
Dam length3,250 ft
Max storage207 AF
Normal storage87 AF
Surface area28.0 ac
Drainage area0.0 sq mi
Hazard potentialLow
ConditionNot Rated

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Longview Sewage Lagoon No 1 -- inflows here typically show up in storage 24-72 hours later.

Track Longview Sewage Lagoon No 1 in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Longview Sewage Lagoon No 1

Where does the data for Longview Sewage Lagoon No 1 come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Low hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.