Taylor Millpond Dam Reservoir Report

Last Updated: December 5, 2025

Taylor Millpond Dam is a historic masonry dam located in Wilson, North Carolina, along the Moccasin Creek.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1900 for irrigation purposes, this dam stands at a hydraulic height of 10 feet with a length of 170 feet. It has a storage capacity of 200 acre-feet and covers a surface area of 75 acres, serving as a vital water resource for the region.

Despite being privately owned, Taylor Millpond Dam is subject to state inspections, with the last inspection conducted in November 1981. Classified as having a significant hazard potential, the dam's condition is currently not rated. With a drainage area of 26,880 acres, this dam plays a crucial role in managing water supply and supporting recreational activities in the area, highlighting the importance of its maintenance and upkeep in the face of changing climate conditions.

As water resource and climate enthusiasts, exploring the history and significance of Taylor Millpond Dam provides insights into the intersection of infrastructure, water management, and environmental sustainability. With its rich legacy dating back over a century, this dam continues to be a key component of the region's water infrastructure, emphasizing the need for ongoing monitoring and maintenance to ensure its resilience in the face of evolving climatic challenges.

Year Completed

1900

Dam Length

170

River Or Stream

Moccasin Creek

Primary Dam Type

Masonry

Surface Area

75

Hydraulic Height

10

Drainage Area

26880

Nid Storage

200

Structural Height

10

Hazard Potential

Significant

Nid Height

10
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.