Scs-Cane Creek Site-18 Reservoir Report
Last Updated: December 5, 2025
SCS-Cane Creek Site-18, located in Okmulgee, Oklahoma, is a state-regulated dam managed by the Oklahoma Water Resources Board.
°F
°F
mph
Wind
%
Humidity
Summary
Built in 1967 by the USDA NRCS, this earth dam stands at a height of 42 feet and spans a length of 1800 feet along Walnut Creek. The primary purpose of this structure is flood risk reduction, with a storage capacity of 1802 acre-feet and a controlled spillway width of 1 foot.
Despite being categorized as having a low hazard potential, SCS-Cane Creek Site-18 is rated as a very high risk due to its age and the lack of recent condition assessments. With only one valve for outlet gates and a last inspection date back in 1980, there is a pressing need for updated risk management measures and emergency action plans to ensure the safety and resilience of this critical infrastructure. For water resource and climate enthusiasts, this site serves as a reminder of the importance of proactive monitoring and maintenance in the face of changing environmental conditions.
Year Completed |
1967 |
Dam Length |
1800 |
Dam Height |
42 |
River Or Stream |
WALNUT CREEK |
Primary Dam Type |
Earth |
Surface Area |
31 |
Hydraulic Height |
42 |
Nid Storage |
1802 |
Structural Height |
42 |
Outlet Gates |
Valve - 1 |
Hazard Potential |
Low |
Foundations |
Soil |
Nid Height |
42 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Scs-Cane Creek Site-18