Thomas Lake Dam Reservoir Report

Last Updated: December 5, 2025

Thomas Lake Dam, located in Henderson, Texas, is a privately owned structure primarily used for recreation purposes.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1959, this earth dam stands at a height of 37 feet and stretches 1300 feet in length, with a storage capacity of 1900 acre-feet. The dam is situated on the TR-Clear Creek river, under the regulatory oversight of the Texas Commission on Environmental Quality (TCEQ).

Despite its age, Thomas Lake Dam has been deemed to have a moderate risk level, with a hazard potential that is currently not available. The dam features an uncontrolled spillway with a width of 200 feet and two uncontrolled outlet gates. While the dam has not been rated for its condition, it has undergone inspections in the past, with the last recorded inspection dating back to August 1983. The risk management measures and emergency action plans for this structure are also not available, highlighting a need for further assessment and preparedness in the event of any potential hazards.

Year Completed

1959

Dam Length

1300

Dam Height

37

River Or Stream

TR-CLEAR CREEK

Primary Dam Type

Earth

Hydraulic Height

37

Nid Storage

1900

Structural Height

37

Outlet Gates

Uncontrolled - 2

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

37
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.