Luther Lake Dam Reservoir Report
Nearby: Burson Lake Dam Hawkins Lake Dam
Last Updated: December 29, 2025
Luther Lake Dam, located in Briscoe, Texas, is a privately owned structure built in 1957 with the primary purpose of water supply.
°F
°F
mph
Wind
%
Humidity
Summary
This earth dam, standing at a height of 30 feet and stretching 800 feet in length, serves as a crucial resource for the surrounding area, with a storage capacity of 300 acre-feet and a normal storage level of 190 acre-feet. Although the dam does not have a spillway, it is equipped with a single outlet gate for managing water flow.
Despite being classified as having a high risk potential, Luther Lake Dam has not been rated for its condition assessment. With no available data on inspection dates or emergency action plans, there is uncertainty surrounding the readiness of the dam in case of any unforeseen events. Water resource and climate enthusiasts may find interest in exploring the history and current state of Luther Lake Dam as it plays a vital role in providing water supply to the region, highlighting the importance of monitoring and maintaining such critical infrastructure for the future.
Year Completed |
1957 |
Dam Length |
800 |
Dam Height |
30 |
River Or Stream |
MEXICAN CREEK |
Primary Dam Type |
Earth |
Surface Area |
19 |
Hydraulic Height |
30 |
Nid Storage |
300 |
Structural Height |
30 |
Outlet Gates |
None - 1 |
Hazard Potential |
Not Available |
Foundations |
Unlisted/Unknown |
Nid Height |
30 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Luther Lake Dam