Jessie May Lake No 2 Dam Reservoir Report

Last Updated: December 5, 2025

Jessie May Lake No 2 Dam, located in McMullen County, Texas, is a privately owned structure designed by the USDA NRCS.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1962, this Earth-type dam serves multiple purposes including fire protection, stock, small fish pond, and recreation. With a height of 20 feet and a length of 1381 feet, the dam has a storage capacity of 140 acre-feet and a surface area of 28 acres.

Despite not having a spillway, the dam has been classified as having a high risk potential. While the hazard potential is not available, the condition of the dam is not rated, and there are no emergency action plans in place. The risk assessment indicates a level 2 risk, highlighting the importance of ongoing monitoring and maintenance to ensure the safety and integrity of the structure. As water resource and climate enthusiasts, understanding the intricacies of dams like Jessie May Lake No 2 Dam is crucial for safeguarding these vital water management systems.

Year Completed

1962

Dam Length

1381

Dam Height

20

River Or Stream

TR-MIRASOL CREEK

Primary Dam Type

Earth

Surface Area

28

Hydraulic Height

20

Nid Storage

140

Structural Height

20

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

20
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.