Marks Lake Dam Reservoir Report

Last Updated: December 5, 2025

Marks Lake Dam, located in Madison, Texas, is a private Earth dam completed in 1960 primarily for water supply purposes.


°F

°F

mph

Wind

%

Humidity

Summary

Standing at a height of 20 feet and with a length of 790 feet, this dam has a storage capacity of 295 acre-feet and covers a surface area of 24 acres. Despite its age, the dam has not been rated for its condition, and its hazard potential is listed as "Not Available".

The dam, situated on TR-Larrison Creek, is managed by private owners and falls under the jurisdiction of the state of Texas. It is not regulated by the state and has no associated structures. With no spillway and limited information on inspections and emergency preparedness, the risk assessment for Marks Lake Dam is considered high. Despite these challenges, the dam continues to serve its primary function of providing water supply to the local area.

Water resource and climate enthusiasts interested in Marks Lake Dam will find its history and current status intriguing. The dam's location, design characteristics, and risk assessment provide valuable insights into the management of water resources in Texas. As efforts continue to assess and improve the safety and functionality of dams like Marks Lake Dam, there is a growing need for increased monitoring and maintenance to ensure the sustainable use of water in the region.

Year Completed

1960

Dam Length

790

Dam Height

20

River Or Stream

TR-LARRISON CREEK

Primary Dam Type

Earth

Surface Area

24

Hydraulic Height

20

Nid Storage

295

Structural Height

20

Outlet Gates

None - 1

Hazard Potential

Not Available

Foundations

Unlisted/Unknown

Nid Height

20
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.