Mallard Lake Dam dam
Mallard Lake Dam
Mallard Lake Dam, located in Burleson, Texas, is a captivating earth dam with a primary purpose of recreation. Built in 1960, this dam stands at a height of 9.2 feet and spans 460 feet in length, offering a serene reservoir with a maximum storage capacity of 74 acre-feet. Situated on the TR-DAVIDSON CREEK, this dam is regulated by the Texas Commission on Environmental Quality (TCEQ) and undergoes regular inspections to ensure its structural integrity and safety.
With a spillway width of 224 feet and a maximum discharge capacity of 1750 cubic feet per second, Mallard Lake Dam serves as both a recreational spot and a crucial water resource management structure. Despite its fair condition assessment in April 2021, the dam poses a moderate risk (3) and has an inspection frequency of two years to monitor any changes in its hazard potential. The presence of four uncontrolled outlet gates adds to the dam's functionality, and its location within the Galveston District highlights its importance in the local water infrastructure.
As water resource and climate enthusiasts explore the intricacies of Mallard Lake Dam, they will discover a blend of engineering marvel and natural beauty. From the dam's design by E E Johnson and Associates to its role in providing recreational opportunities and managing water flow on TR-DAVIDSON CREEK, this structure stands as a testament to human ingenuity in harnessing and preserving vital water resources. With ongoing risk assessments and regular inspections, Mallard Lake Dam remains a vital component of Texas' water infrastructure, balancing functionality with environmental stewardship for the benefit of both residents and wildlife in the region.
Dam data reference
Condition Assessment
- Satisfactory
- No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
- Fair
- No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
- Poor
- A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
- Unsatisfactory
- A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
- Not Rated
- The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Hazard Potential Classification
- High
- Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
- Significant
- Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
- Low
- Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
- Undetermined
- Dams for which a downstream hazard potential has not been designated or is not provided.
Plan around the weather
Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day temperature & precipitation
Daily temperatures, snow, and rain projected over the next two weeks.
Nearby streamflow gauges
USGS streamgauges around Mallard Lake Dam -- inflows here typically show up in storage 24-72 hours later.
| Streamgauge | Discharge | View |
|---|---|---|
| Davidson Ck Nr Lyons | 56 cfs | → |
| Yegua Ck Nr Somerville | 0 cfs | → |
| Brazos Rv At Sh 21 Nr Bryan | 7,110 cfs | → |
| E Yegua Ck Nr Dime Box | 316 cfs | → |
| Bee Ck Trib A At College Station | 0 cfs | → |
| Bee Ck Main At College Station | 0 cfs | → |
Make a day of it
Boat launches, lakeside camping, fishing access, and other reservoirs near Mallard Lake Dam.
Track Mallard Lake Dam in the Snoflo app
Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.
About Mallard Lake Dam
Where does the data for Mallard Lake Dam come from?
Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.
How often is the report updated?
NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.
What does the Not Available hazard rating mean?
The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.
What's "% of normal"?
The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).
Can I get alerts when storage crosses a threshold?
Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.
Other water bodies near here
Snoflo-tracked reservoirs and dams within driving distance of Mallard Lake Dam.