Dam Report

Fountain View Dam dam

Texas, USA Tributary To Of Mountain Creek Hazard Not Available
Today high
--
Tonight low
--
Dam height
17ft
Hazard rating
Not Available
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Fountain View Dam -- None dam
Fountain View Dam None · Tributary To Of Mountain Creek
About this dam

Fountain View Dam

Located in Dallas, Texas, the Fountain View Dam stands as a testament to private ownership and state regulation, with the Texas Commission on Environmental Quality overseeing its permitting, inspection, and enforcement. This earth dam, with a buttress core type, holds a maximum storage capacity of 38 acre-feet and a normal storage of 32 acre-feet. The dam boasts a spillway width of 15 feet and an uncontrolled outlet gate, ensuring proper water discharge.

The dam, constructed on a tributary of Mountain Creek, serves primarily for purposes other than flood control or water supply. With a fair condition assessment as of August 2017, the Fountain View Dam poses a moderate risk level and is subject to regular inspections every five years. Despite its relatively small surface area of 5 acres and limited drainage area, the dam's 350-foot length and 17-foot height contribute to its overall hydraulic efficiency and structural integrity.

For water resource and climate enthusiasts, Fountain View Dam presents an intriguing case study of a privately owned structure in a regulated state jurisdiction. With its unique design features and moderate risk assessment, this dam offers valuable insights into the intersection of private ownership, state oversight, and sustainable water management practices.

StateNone
River / streamTributary To Of Mountain Creek
NID IDTX09647
Owner typePrivate
Primary purposeOther
Dam typeEarth
Dam height17 ft
Dam length350 ft
Max storage38 AF
Normal storage32 AF
Surface area5.0 ac
Hazard potentialNot Available
ConditionFair
Last inspectionWed, 03 May 2017 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Fountain View Dam -- inflows here typically show up in storage 24-72 hours later.

Track Fountain View Dam in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Fountain View Dam

Where does the data for Fountain View Dam come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Not Available hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.