Dam Report

Miletree Run Dam No. 1 dam

West Virginia, USA Miletree Run Ck Hazard Low
Today high
--
Tonight low
--
Dam height
26ft
Hazard rating
Low
Loading current conditions…
Loading next 24 hours…
Loading 7-day outlook…
Miletree Run Dam No. 1 -- None dam
Miletree Run Dam No. 1 None · Miletree Run Ck
About this dam

Miletree Run Dam No. 1

Miletree Run Dam No. 1, located in Roane, West Virginia, was completed in 1930 and serves as a vital water supply structure for the city of Spencer. With a height of 26 feet and a storage capacity of 64 acre-feet, this earth dam plays a crucial role in managing the water resources of Miletree Run Creek. Despite its importance, the dam is currently assessed as being in poor condition, raising concerns about its long-term sustainability.

Owned and regulated by the local government with oversight from the West Virginia Department of Environmental Protection, Miletree Run Dam No. 1 has a low hazard potential but requires attention to improve its structural integrity. The dam's last inspection in May 2017 revealed deficiencies, prompting the need for maintenance and potentially a rehabilitation plan to ensure the safety and functionality of this essential water infrastructure. The dam's proximity to the Pittsburgh District of the US Army Corps of Engineers underscores its significance in the regional water management system.

The deteriorating condition of Miletree Run Dam No. 1 highlights the challenges faced in maintaining aging water infrastructure in West Virginia. As climate change impacts continue to affect water resources, the importance of investing in the upkeep and modernization of dams like Miletree Run Dam No. 1 becomes increasingly apparent. With proper maintenance and upgrades, this dam can continue to provide reliable water supply and contribute to the resilience of the surrounding communities in the face of changing climate patterns.

StateNone
River / streamMiletree Run Ck
NID IDWV08702
Owner typeLocal Government
Primary purposeWater Supply
Dam typeEarth
Year built1930
Dam height26 ft
Dam length180 ft
Max storage64 AF
Normal storage32 AF
Surface area5.0 ac
Drainage area0.5 sq mi
Hazard potentialLow
ConditionPoor
Last inspectionThu, 04 May 2017 00:00:00 GMT

Dam data reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action.
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environmental damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Detailed forecast

Plan around the weather

Same NOAA / yr.no feed Snoflo's iOS app uses. Watch the precipitation column on the meteogram -- rain on the basin upstream typically lifts inflow 24-72 hours later.

Hourly detail

Next 5 days, hour by hour

Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.

Loading hourly forecast…
Deep dive

5-day forecast table

Every 3 hours, broken out across temperature, snow, rain, humidity, and wind. Each cell is colour-coded relative to the column min/max.

TimeConditionTemp (°F)Snow (in)Rain (in)Humidity (%)Wind (mps)Wind dir
Loading detailed forecast…
Long-term outlook

15-day temperature & precipitation

Daily temperatures, snow, and rain projected over the next two weeks.

Loading 15-day outlook…
Regional inflow

Nearby streamflow gauges

USGS streamgauges around Miletree Run Dam No. 1 -- inflows here typically show up in storage 24-72 hours later.

Track Miletree Run Dam No. 1 in the Snoflo app

Save this dam as a favorite and get the local NOAA / yr.no forecast plus regional flow context wherever you are.

FAQ

About Miletree Run Dam No. 1

Where does the data for Miletree Run Dam No. 1 come from?

Structural and regulatory data come from the U.S. Army Corps of Engineers' National Inventory of Dams (NID). Weather forecast comes from NOAA / yr.no -- the same feed Snoflo's iOS app uses.

How often is the report updated?

NID structural data refreshes annually as the Corps publishes updated assessments. The weather forecast refreshes throughout the day.

What does the Low hazard rating mean?

The Corps of Engineers' hazard potential classification grades probable consequences if the dam fails: High = probable loss of human life; Significant = no probable loss of human life but possible economic loss / environmental damage; Low = no probable loss of human life, only minor economic / environmental losses. See the Dam Data Reference card above for the full definitions.

What's "% of normal"?

The current storage value compared to the historical average storage on this calendar day. 100% = right on average; values above 100% mean above-normal storage (wet year); values below mean below-normal (dry year or drought).

Can I get alerts when storage crosses a threshold?

Yes -- alerts are managed in the Snoflo iOS app. Favorite this dam, set a threshold, and you'll get a push the moment conditions cross.

More reservoirs

Other water bodies near here

Snoflo-tracked reservoirs and dams within driving distance of Miletree Run Dam No. 1.

Premium feature

Favorites and alerts are part of Snoflo Premium. Save reservoirs, set storage thresholds, and get push notifications when conditions cross.

Upgrade to Premium Not now
{# FAVORITE-LIMIT MODAL — fires when a non-premium user hits the 3-favorite cap. Mirrors the iOS PremiumGateSheet's .bookmarkLimit case: same copy direction (limit reached → unlimited with Premium), same primary CTA shape. Triggered from toggle_fave (pre-flight) and the 403 error handler. #} {# ALERTS-IN-APP MODAL — opened from the Account dropdown's "Alerts" link. Push-notification alerts (snow / flow / buoy / ski) are managed in the iOS app because they require APNs + device tokens; the webapp has no equivalent surface, so the right thing to do is point users at the App Store. Mirrors the per-gauge #sf-cp-alerts-modal popup on recChildFlow.html. #}