Denton Creek Near Grapevine Flow Report
As of August 3, 2026, Denton Creek Near Grapevine is flowing at 72 cfs with a gage height of 5.24 ft. Source: USGS gauge #08055000, refreshed throughout the day.
Historical Data
Denton Creek Near Grapevine at a glance
How Denton Creek Near Grapevine is running right now, where it sits on the map, and the key gauge stats.
Denton Creek Near Grapevine is flowing at 72 cfs, with the water sitting 5.24 ft at the gage.
This is USGS gauge #08055000 in Texas. Over the past 10 days the average has been 86 cfs, peaking at 120 cfs.
For real-time updates and historical context, see the realtime view or the historical comparison. Browse other gauges in the Texas flow report.
Engineering Data
Flow-duration statistics and observed peak-flow context computed from this gauge’s complete daily record (USGS #08055000).
Estimate flows at an ungauged site
Drainage-area ratio transfer from this gauge . Most reliable for hydrologically similar sites in the same watershed with area ratios between roughly 0.5 and 1.5.
Percentiles are flow-duration values computed from this gauge’s observed daily record as archived by Snoflo. Return periods are Weibull plotting-position estimates from observed annual maxima, provided as general reference context only. Always verify against official USGS NWIS records. Part of Snoflo for Engineering.
Streamflow Forecast
Over the next 5 days, Denton Ck Nr Grapevine is expected to hold near today's 72 cfs, toward roughly 66 cfs by 2026-08-07 (likely range 40-109 cfs) -- drier than normal for the date.
Powered by PULSE — Snoflo’s forecast engine, trained on this gauge’s full record of storms, snowmelt, and dry spells.
| Date | Expected (p50) | Likely range (p25–p75) | vs normal | Projected stage |
|---|
How does this compare to past years?
Year-over-year overlay, annual peak discharge, the full distribution of daily flows on record, and the gauge's rating curve.
Weather Forecast
Next 5 days, hour by hour
Temperature line with weather symbols on top, snow + rain accumulation as columns, humidity as a dotted line.
5-day forecast table
Every 3 hours, broken out across temperature, snow, rain, humidity, and wind.
| Time | Condition | Temp (°F) | Snow (in) | Rain (in) | Humidity (%) | Wind (mps) | Wind dir |
|---|---|---|---|---|---|---|---|
| Loading detailed forecast… | |||||||
15-day forecast
Daily temperatures, snow, and rain projected over the next two weeks.
Denton Creek Near Grapevine
The primary constituents of this streamgauge are the US Geological Survey and the Trinity River Authority. The gauge is located downstream of Lake Grapevine and the Grapevine Dam, which can significantly impact water levels during wet seasons. The creek experiences seasonal trends, with the highest flows occurring in the spring due to increased precipitation and snowmelt. Interestingly, the creek has also been known to experience flash floods during heavy rainfall events. Overall, the Denton Creek streamgauge is an essential resource for monitoring water levels and ensuring the safety of residents in the area.
Nearby streamflow levels
Cross-check Denton Creek Near Grapevine's discharge against nearby gauges to spot whether the change here is local or regional.
| Gauge | Streamflow |
|---|---|
| Denton Creek Near Grapevine | 72 cfs |
| Elm Fork Trinity River Near Carrollton | 137 cfs |
| Elm Fork Trinity River Near Lewisville | 457 cfs |
| Indian Creek At Fm 2281 | 3 cfs |
| Elm Fork Trinity River At Spur 348 | 182 cfs |
| Hickory Creek At Denton | 0 cfs |
Nearby snowpack data
Snowpack at SNOTEL stations near Denton Creek Near Grapevine. Spring snowmelt is the dominant driver of streamflow in mountain basins -- a deep snowpack upstream means more runoff later in the season.
| SNOTEL station | Snowpack |
|---|---|
| Frisco | 0 in |
River levels & flood safety
- Read the level before you go
- A river that's runnable at one flow can be deadly at another. Check current discharge and gage height — like the values shown above — against the flood-stage thresholds, and remember levels can spike fast after rain or a dam release.
- Respect cold water
- Snowmelt rivers run cold even in summer. Sudden immersion triggers cold-water shock and saps strength within minutes. Wear a PFD, dress for the water temperature (not the air), and never wade or paddle alone.
- Watch for swiftwater hazards
- Strainers (downed trees), undercut rocks, and low-head dams are the deadliest features on moving water. High, fast, muddy water hides them. If in doubt, scout from shore and portage.
- Mind flash floods & releases
- Narrow canyons can flood from a storm miles upstream, and dam-controlled reaches can rise without warning. Know the forecast, the release schedule, and your exit before you launch.
Track Denton Creek Near Grapevine in the Snoflo app
Save this gauge as a favorite, set push alerts when streamflow crosses a threshold (e.g. "alert me when Denton Creek Near Grapevine crosses 5,000 cfs"), and Snoflo's iOS app will push the moment USGS reports the crossing.
About Denton Creek Near Grapevine
What is the Denton Creek Near Grapevine flow rate right now?
As of August 3, 2026, Denton Creek Near Grapevine is flowing at 72 cfs. The live value, gage height, and 24-hour trend are shown at the top of this page.
Is the Denton Creek Near Grapevine running high or low right now?
Check the percent of median figure on this page: above 100% means Denton Creek Near Grapevine is running higher than normal for the date, below 100% means lower. The 24-hour trend shows whether it's rising or falling.
Where does the streamflow data for Denton Creek Near Grapevine come from?
Discharge, gage height, and water temperature come directly from the USGS streamflow gauge 08055000. Snoflo refreshes the time series throughout the day. Forecasts come from the NOAA / yr.no feed Snoflo's iOS app uses.
How often is the report updated?
USGS gauges report continuously (typically every 15 minutes). Snoflo pulls fresh values throughout the day — look for the "as of" timestamp on the streamflow hero card.
What's the difference between discharge and gage height?
Discharge (cubic feet per second, or cfs) is the volume of water flowing past the gauge each second. Gage height is how high the water sits at the gauge (feet). They're related by a rating curve specific to each gauge — higher water means more flow, but the exact ratio depends on channel shape.
How is "percent of median" calculated?
Today's discharge is compared to the historical median discharge on this calendar day across the gauge's full record. 100% = right on median; 200% = a very high year; 30% = a drought-level low.
What are flood stages, and is this river safe right now?
Flood stages are NWS-defined gage-height thresholds — Action, Minor, Moderate, Major — marking when nearby roads or floodplains start to be affected. "Safe" depends on your activity and skill: a level that's a fun paddle for an expert can be lethal for a wader. Always check the current level against the thresholds above and the safety links, and when in doubt, stay off the water.
Can I get alerts when Denton Creek Near Grapevine rises?
Yes — flow alerts are managed in the Snoflo iOS app. Favorite this gauge, set a streamflow threshold (e.g. "alert me when discharge crosses 5,000 cfs"), and you'll get a push the moment USGS reports the crossing.
Access the free Denton Creek Near Grapevine report
Create your free account to track this river — and everything else you love on the water.
- Flow alerts — get pinged the moment this river hits your range
- Save favorites — every river, lake & snowpack in one place
- Full history & forecasts — plus the free iPhone app