Phoenix Cement Dam #1 Reservoir Report

Last Updated: December 5, 2025

Phoenix Cement Dam #1, located in Clarkdale, Arizona, was completed in 1989 and serves as a crucial infrastructure for flood risk reduction in the region.


°F

°F

mph

Wind

%

Humidity

Summary

This private-owned earth dam stands at a height of 33.5 feet and has a storage capacity of 35.6 acre-feet, with a normal storage level of 27.9 acre-feet. The dam spans 544 feet in length and has a spillway width of 16 feet, ensuring effective water management during heavy rainfall seasons.

State-regulated and inspected by the Arizona Department of Water Resources, Phoenix Cement Dam #1 has been deemed to have a low hazard potential and a moderate risk level. Despite not being rated for its condition assessment, the dam meets regulatory guidelines and is equipped to handle emergency situations. The dam's location in Yavapai County, close to the Los Angeles District, makes it a critical piece of infrastructure for maintaining water resources and protecting the surrounding areas from flooding. Water resource and climate enthusiasts can appreciate the significance of Phoenix Cement Dam #1 in safeguarding against natural disasters and ensuring water sustainability in the region.

Year Completed

1989

Dam Length

544

Dam Height

33.5

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

2.5

Nid Storage

35.6

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

34
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.