Jcp1 Reservoir Report
Last Updated: January 12, 2026
Jcp1 is a privately owned dam located in Taylor County, Florida, near the city of Perry.
°F
°F
mph
Wind
%
Humidity
Summary
The dam, with a height of 17 feet and a length of 4305 feet, was primarily built for recreation purposes and is situated on an unnamed pond. It has a storage capacity of 714 acre-feet and covers a surface area of 27 acres.
Although the dam's hazard potential is currently classified as undetermined and its condition has not been rated, it is subject to state regulation, permitting, inspection, and enforcement. The dam is within the jurisdiction of the state of Florida and is under the oversight of the Jacksonville District of the US Army Corps of Engineers. While the last inspection date, condition assessment, and emergency preparedness information are not available, the dam's risk assessment, management measures, and other relevant details remain unspecified.
Given the dam's location in an area with a rich water resource and the potential impact of climate change on water availability and quality, continued monitoring and assessment of Jcp1's condition and safety measures are crucial for the protection of both the surrounding environment and the community.
Dam Length |
4305 |
Dam Height |
17 |
River Or Stream |
UNNAMED POND |
Primary Dam Type |
Earth |
Surface Area |
27 |
Nid Storage |
714 |
Hazard Potential |
Undetermined |
Nid Height |
17 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Fenholloway River Near Foley
|
3cfs |
Fenholloway River Nr Perry Fla
|
117cfs |
Econfina River Near Perry
|
23cfs |
Suwannee River At Dowling Park
|
1350cfs |
Suwannee River At Luraville
|
1540cfs |
Steinhatchee River Near Cross City
|
3cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Jcp1