Burch Lake Dam Reservoir Report

Last Updated: December 5, 2025

Burch Lake Dam, also known as Jebco Properties Lake Dam, is a private structure located in Fayette, Georgia, specifically in the city of Brooks.


°F

°F

mph

Wind

%

Humidity

Summary

Built in 1967 by the Natural Resources Conservation Service, this earth dam serves primarily for recreational purposes and stands at a height of 27.6 feet with a structural height of 24.6 feet. The dam has a normal storage capacity of 308 acre-feet and a drainage area of 1630 acres.

Despite being unlisted as a state-regulated dam, Burch Lake Dam is inspected every 5 years with a low hazard potential rating. The dam features an uncontrolled spillway type and outlet gates. With a moderate risk assessment rating of 3, the dam has not been rated in terms of its condition assessment. While there are no emergency action plans currently in place, the dam remains a significant feature for water resource and climate enthusiasts in the area due to its recreational value and historical construction by the SCS.

Year Completed

1967

Dam Length

550

Dam Height

27.6

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

38.5

Hydraulic Height

24.6

Drainage Area

1630

Nid Storage

689

Structural Height

24.6

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

28
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.