City Of Washington Little Beaverdam Creek Reservior Dam Reservoir Report
Last Updated: December 13, 2025
The City of Washington Little Beaverdam Creek Reservoir Dam in Wilkes, Georgia, is a crucial structure for water supply in the region.
°F
°F
mph
Wind
%
Humidity
Summary
This earth dam, with a height of 13 feet and a length of 435 feet, is designed to hold a maximum storage capacity of 279 acre-feet. The reservoir covers an area of 16 acres and is primarily used for water supply purposes.
Despite its low hazard potential, the dam has been inspected regularly, with the last assessment conducted in October 2016. The dam is under state jurisdiction and is not regulated by a federal agency. The risk assessment for the dam is moderate, indicating a need for ongoing monitoring and maintenance to ensure its structural integrity and the safety of the surrounding community. With the dam located on Little Beaverdam Creek, enthusiasts of water resources and climate will find this structure an essential component of the region's water management infrastructure.
Dam Length |
435 |
Dam Height |
13 |
River Or Stream |
LITTLE BEAVERDAM CREEK |
Primary Dam Type |
Earth |
Surface Area |
16 |
Nid Storage |
279 |
Outlet Gates |
Uncontrolled |
Hazard Potential |
Low |
Foundations |
Unlisted/Unknown |
Nid Height |
13 |
Seasonal Comparison
Weather Forecast
Nearby Streamflow Levels
Kettle Creek Near Washington
|
6cfs |
Little River Near Washington
|
46cfs |
Broad River Near Bell
|
672cfs |
South Fork Broad River At Carlton
|
87cfs |
Broad River Above Carlton
|
327cfs |
Little River Near Mt. Carmel
|
64cfs |
Dam Data Reference
Condition Assessment
SatisfactoryNo existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
HighDams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
City Of Washington Little Beaverdam Creek Reservior Dam