Ellerbee Lake Dam Reservoir Report

Last Updated: December 6, 2025

Ellerbee Lake Dam, located in Upson, Georgia, was completed in 1985 and is primarily used for recreational purposes.


°F

°F

mph

Wind

%

Humidity

Summary

The dam, designed by the Natural Resources Conservation Service, is an earth dam with a core made of stone and stands at a height of 24 feet with a length of 450 feet. It has a storage capacity of 155 acre-feet and covers a surface area of 12 acres. The dam's spillway type is uncontrolled, with uncontrolled outlet gates.

Despite being privately owned, the dam is subject to state jurisdiction and inspection, with the last inspection conducted in June 2018. It has been assessed as having a low hazard potential and a moderate risk level. While the dam is not currently regulated or permitted by the state, it meets the guidelines for emergency action plans, although specific details on preparedness and risk management measures are not listed. Overall, Ellerbee Lake Dam serves as a vital resource for water recreation enthusiasts in the area and is monitored to ensure the safety of its surrounding communities.

Year Completed

1985

Dam Length

450

Dam Height

24

River Or Stream

UNKNOWN

Primary Dam Type

Earth

Surface Area

12

Nid Storage

155

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

24
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.