Morris Lake Dam No. 2 Reservoir Report

Last Updated: December 5, 2025

Morris Lake Dam No.


°F

°F

mph

Wind

%

Humidity

Summary

2, located in Griffin, Georgia, is a private masonry dam with a height of 11 feet and a length of 175 feet. The dam has a storage capacity of 53 acre-feet and serves the purpose of water resource management in the area. With a low hazard potential and a moderate risk assessment rating, the dam is considered to be in satisfactory condition, although it has not been officially rated.

Owned and operated privately, Morris Lake Dam No. 2 does not fall under state jurisdiction or regulation. The dam features an uncontrolled spillway and outlet gates, with no associated locks. While the dam is not currently inspected or maintained by state agencies, its risk management measures are in place to ensure the safety of the surrounding community in case of emergencies.

Water resource and climate enthusiasts interested in Morris Lake Dam No. 2 can appreciate the engineering and design of this structure, as well as its role in managing water resources in Spalding County. The dam's location and specifications make it a notable feature in the area, contributing to the overall ecosystem and water management efforts. Further research and exploration of this dam can provide valuable insights into the intersection of infrastructure, water resources, and environmental stewardship.

Dam Length

175

Dam Height

11

Primary Dam Type

Masonry

Surface Area

9.2

Drainage Area

1548

Nid Storage

53

Outlet Gates

Uncontrolled

Hazard Potential

Low

Foundations

Unlisted/Unknown

Nid Height

11
       
Seasonal Comparison

Weather Forecast

Dam Data Reference

Condition Assessment

Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner's property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.